top of page

OXY3

Cleanliness. Sustainability. Innovation.

Summary of
key-benefits

  • Easy assembly and disassembly:
    It’s installed in 5 to 10 minutes

  • Fully automated process:
    Use the processing time for other activities

  • The remaining ozone is automatically destroyed:
    No need of lengthy airing of the vehicle afterwards

  • Operating costs per use:
    May vary depending on the use, but will always be less than € 2.00

  • The vehicle is free
    from odors and
    smells:
    Valuable performance  for every customer

  • A remarkable upgrade:
    The vehicle is free
    from smells, more enjoyable to use and, therefore, easier to
    sell

  • Protecting the environment and users:
    No chemicals added 

  • Protecting both users and customers:
    By the end of the process, the remaining ozone will be automatically destroyed

  • Protecting the
    vehicle:

    The equipment and electronic devices in the interior are not affected

STRONG PERFORMANCE FOR THE BEST SUCCESS

Mode of action

A sophisticated combined process of water vapor and ozone is decisive for the success of the treatment. Due to its chemical instability in ambient conditions, ozone (O3) disintegrates to form molecular oxygen (O2), a main element found in the air that we breathe. This means that the Oxy3 produces the amount of ozone required for treatment on the spot. At the end of the treatment, it makes sure that the remaining ozone is re-neutralized (O3 to O2). This means that the vehicle can be put back to use immediately after the treatment.

In combination with ozone, the water vapor used produces active oxygen and moistens the surfaces with condensate. The moisture and the active oxygen ensure that any other organic odorants bound to the surfaces (i.e. cushions) are broken down and that pollutants (such as carcinogenic PAHs) are effectively destroyed. The depth of penetration into the surfaces depends on the type and the texture of the surface. 

Nevertheless, so-called in-depth cleaning – for instance all the way into the foamed material of the seats – cannot be guaranteed with the use of the Oxy3.

Wirkungsweise

The performance in figures

PAH breakdown in a PPE jacket

The accredited analytical laboratory in Vienna ESW Wruss carried out the PAH analysis of a PPE jacket. The 16 "EPA PAHs" were analyzed, which are representative of the entire group of substances according to the Environmental Protection Agency (EPA).

The results after just 90 minutes of treatment are as follows:
 

-Upper and lower material completely decontaminated.
All PAHs broke down below the OEKO-TEX guideline values and many of them even below the detection limits (see illustration).
 

-Membrane decontaminated.
15 out of 16 PAHs are broke down below the OEKO-TEX guideline values and in some cases even below the detection limits.

Statistik_Keimbelastung & Schadstoffabbau-MW_2023_11-Oberstoff-900px.png

For more detailed information on the laboratory results, please click on the button below:

Mechanical testing of the PPE jacket

The extreme load test showed that the tear resistance of the outer material of firefighter clothing exceeds the strength required by the manufacturers. This means that the upper material of the firefighter clothing retains its protective properties even after 30 treatments with Oxy3 (10 days in a row, 3 times a day). In addition, the reflectors and hoop and loop fasteners are still in perfect condition.

Before the treatment

PSA-Jacke Prüfung Oxy3 Behandlung

ISO-400 – F/5.6 – 0,5s

After 30 treatments

PSA-Jacke Prüfung Oxy3 Behandlung

ISO-400 – F/5.6 – 0,5s

Dekontaminierung

What distinguishes the Oxy3
from conventional ozone generators?

The Oxy3 is the only device on the market that works with the combined process of "ozone, active oxygen and water vapor".

Conventional ozone generators use air to produce ozone with oxygen found in the air. However, air only consists of 21% oxygen, with the rest being nitrogen (78%) and trace gases including miscellaneous environmental contaminants (1%). These substances also have to go through the ozone generator. Thus, the formation of undesired substances (gases) such as nitrogen oxide is unavoidable. Nitrogen oxide often leaves behind an unpleasant odor in the interior of a vehicle that can only be removed by a lengthy airing out. Nitrogen oxide is quite hazardous (toxic) for humans and the environment. Conversely, the Oxy3 only receives the purest of oxygen from an oxygen cylinder. This ensures the generation of highly purified ozone and any hazardous by-products are avoided up to 100%.

At the end of the process, the Oxy3 harmlessly eliminates the remaining ozone; the vehicle can immediately be used again. Inconvenient and lengthy airing is no longer necessary.

Product components

1 cup

Sugar

Components_EN.png
Komponenten Oxy3 Ozongerät
Produktkomponenten
Technisch Daten
Downloads

Technical data sheet (in German)

Service offer (in German)

Contact
automobiles-automotives-black-and-white-70912_edited_edited.jpg

Do you have any questions?

Please contact us for questions on the product or technology
bottom of page